How to repair a micro water pump in an electric kettle that doesn't produce water?

2023-04-12 22:13:32

1、 The reason why the water pump does not discharge water

The micro water pump in an electric kettle is an important component, which is used to extract water from the kettle and heat it. If the water pump does not produce water, the first step is to check if the water pump is working properly. There are many possible reasons, such as power failure, motor failure, pump head failure, etc.

2、 Repair steps for water pump failure to discharge water

Check the power supply

Firstly, check if the power supply of the water pump is normal. If the power supply is abnormal, it is necessary to check whether the power cord is damaged and whether the power plug is loose. If the power supply is normal, a power failure can be ruled out.

Check the motor

If the power supply is normal, the next step is to check whether the motor is working properly. You can try turning the motor by hand to see if there is any jamming or poor rotation. If there is, it is necessary to disassemble the water pump and check if the motor is damaged. If it is damaged, a new motor needs to be replaced.

Check the pump head

If the motor is working properly, the next step is to check if the pump head is working properly. You can disassemble the water pump and check if the impeller inside the pump head is damaged or blocked. If the impeller is damaged or blocked, it is necessary to replace it with a new impeller or clean the pump head.

Check the sealing ring

In addition, it is necessary to check whether the sealing ring of the water pump is aging or damaged. If the sealing ring ages or is damaged, it can cause water pump leakage or insufficient outlet pressure. A new sealing ring needs to be replaced.

Replace parts

If the above steps do not solve the problem, it may be that the internal parts of the water pump are severely damaged and important parts need to be replaced, such as bearings, shaft sleeves, etc.

3、 Maintenance precautions

When repairing, it is necessary to turn off the power first to avoid the risk of electric shock.

Before disassembling the water pump, it is necessary to drain the internal water to avoid splashing and scalding.

When replacing parts, it is necessary to pay attention to the specifications and models of the parts to avoid installation errors.

After the repair is completed, testing is required to ensure that the water pump is working properly.

4、 Preventive measures

To avoid the situation where the micro water pump of the electric kettle does not discharge water, the following preventive measures can be taken:

Regularly clean the electric kettle and micro water pump to maintain cleanliness.

Regularly check if the power cord and plug are loose or damaged.

Avoid dry burning and overloading when using an electric kettle.

Avoid impact and vibration on the water pump during storage and use.

Choose reliable brands and models to ensure the performance and safety of the water pump.