Usage of micro diaphragm air pump

2023-04-12 22:12:13

Micro diaphragm air pump is a compact and portable air pump widely used in medical, scientific research, teaching and other fields. It is driven by a micro motor and has the characteristics of high efficiency, low noise, low vibration, and low maintenance. The core component of the air pump is the diaphragm, which can move back and forth under the drive of the motor, thereby compressing and discharging air.

1、 Preparation before use of micro diaphragm air pump

Check the power supply: Confirm whether the power supply used by the micro diaphragm air pump meets the requirements. If necessary, please use an appropriate power adapter.

Check the appearance of the air pump: Ensure that the appearance of the air pump is intact and there are no obvious damages or defects. Check if all components are securely installed, especially the diaphragm and motor parts.

Cleaning and lubrication: Use appropriate cleaning agents to clean the various components of the air pump, and then lubricate them with appropriate lubricants to ensure their normal operation.

2、 Usage of micro diaphragm air pump

Connect the power: Connect the micro diaphragm air pump to a suitable power source and ensure that the power switch is in the off state.

Start and adjust: Turn on the power switch and slowly adjust the pressure regulating valve of the air pump to gradually reach the required working pressure. Be careful not to fully open the pressure regulating valve at the beginning to avoid overloading the air pump.

Work status monitoring: During the operation of the air pump, it is necessary to constantly monitor its working status. If any abnormal sounds, vibrations, overheating, etc. are found, the machine should be stopped immediately for inspection.

Shutdown and shutdown: When shutdown is required, first close the pressure regulating valve, and then turn off the power switch. Before turning off the power, ensure that the pressure inside the air pump has been completely released.

Maintenance and storage: When the micro diaphragm air pump is not used for a long time, it should be stored in a dry and ventilated place, and regularly inspected and maintained.

3、 Precautions

It is strictly prohibited to use micro diaphragm air pumps in flammable and explosive environments.

Do not use beyond the design pressure of the air pump to avoid equipment damage or personal injury.

During use, do not touch the heating part of the air pump to avoid burns.

If any leakage, abnormal sound or vibration is found in the air pump, it should be stopped immediately for inspection.

Before carrying out any repair and maintenance work, be sure to cut off the power supply and ensure that the pressure inside the air pump has been completely released.

When cleaning and lubricating the air pump, special cleaning agents and lubricants should be used, and inferior or harmful lubricants should not be used.

When handling or storing air pumps, they should be placed in a dry and ventilated place, avoiding direct sunlight and humid environments.

During use, the wires and plugs of the air pump should be regularly checked. If there is any damage or aging, they should be replaced in a timely manner.

During use, regular performance testing and maintenance of the air pump should be carried out to ensure its normal operation and extend its service life.